http://obscure-0010.blogspot.com/2008_10_12_archive.html
Hack
Archived Posts from this Category
November 8, 2008
1. Download Pre Update and Post Update patch from XXXXX
2. Download the Original 10.5.5 Combo Update from APPLE
3. Put all three files on your desktop!!!
* (-a-) Prepare for Combo Update
* (-b-) Official Apple 10.5.5 Combo Update
* (-c-) Post Combo Update Patches
4. NORMAL –INTEL CHIPSET– USERS
*Install
* (-a-) first Combo Update (no restart)
* (-b-) next Official Apple 10.5.5 Combo Update (no restart) , and last
* (-c-) and once finished customized install restart…
* Wait for second restart as usual from original update…
August 27, 2008
August 21, 2008
1. after you boot with the boot-132 disc, don’t type anything, just press ENTER.
2. replace w/ the retail leopard install dvd. don’t press anything yet. wait ’til the blinking in your optical drive stops then press ENTER.
3. for the hex code, the default should already be your optical drive since you just loaded from the boot-132 disc. i believe it differs w/ every system. for some, it’s “9f”, others, “df”, mine is “fe”. so to boot w/ the retail leopard install dvd (w/c is already in your optical drive), just press ENTER.
4. you may then press F8, then type “-v -f” and press ENTER to force-load the kext files in verbose mode.
5. from here, if you get to see the usual installation window, all you need is common sense. wink.gif
6. good luck.
August 13, 2008
* Install Method: Kalyway 10.5.1 & Kalyway Combo 10.5.2 Update using PCWIZ’s Tutorial and Additional Installers
* Audio: ALC889A Works 100% with PCWIZ’s patch (applied twice, first time didn’t take.)
* Ethernet: Works 100%
* SATA: All 6 ports work @ 3.0 Gigabit
* USB: 2 ports reported as High-Speed 2.0; 6 ports reported as USB 1.0 (Have not pursued a fix at this time)
* Optical Drive: SATA LITE-ON DVDRW LH-20A1L Works 100%
* IDE: Not tested.
* Shutdown, Sleep and Reboot: Works
* Video Card: EVGA 8800GT 512 MB patched with Scott Dangel’s NVinstaller v.41 Installed AFTER Kalyway Combo 10.5.2 Update. Works 100% (Core Image, Quartz Extreme and Rotation All supported)
* Ram: 8 Gigs of 4 x 2GB G.Skill DDR-1000 PC2-8000 F2-8000CL5D-4GBPQ All Recognized and Works 100% Yeah Baby!!!
* Processor: Intel Quad Core Q6700 @ 2.67GHz
Yes. Fully supported EFI v8 + Vanilla kernel
No. PCWIZ’s Addtional installer needed and Scott Dangel’s NVinstaller v.41 needed
August 12, 2008
Standard CMOS Features:
a. Change the Date and Time to the correct values
b. Set “Drive A” to “None”
c. Set “Floppy 3 Mode Support” to “Disabled’
d. Set “Halt On” to “All, But Keyboard”
Advanced BIOS Features:
a. Set “First Boot Device” to “CDROM”
b. Set “Second Boot Device” to “Hard Disk”
c. Set “Third Boot Device” to “Disabled”
d. Set “HDD S.M.A.R.T. Capability” to “Enabled”
e. Set “Limit CPUID Max. to 3″ to “Disabled”
f. Set “No-Execute Memory Protect” to “Enabled”
g. Set “CPU Enhanced Halt (C1E)” to “Enabled”
h. Set “CPU Thermal Monitor 2 (TM2)” to “Enabled”
i. Set “CPU EIST Function” to “Enabled”
j. Set “Virtualization Technology” to “Enabled”
k. Set “Full Screen LOGO Show” to “Disabled”
l. Set “Init Display First” to “PEG”
Integrated Peripherals:
a. Set “SATA AHCI Mode” to “AHCI”
b. Set “SATA Port0-1 Native Mode” to “Enabled”
c. Set “USB Controller” to “Enabled”
d. Set “USB 2.0 Controller” to “Enabled”
e. Set “USB Keyboard Suport” to “Enabled”
f. Set “USB Mouse Support” to “Enabled”
g. Set “Legacy USB storage detect” to “Enabled”
h. Set “Azalia Codec” to “Auto”
i. Set “Onboard H/W LAN” to “Disabled” (unless you plan on just living with the onboard Ethernet quirks)
j. Set “Onboard IDE Controller” to “Disabled” (unless you plan on using the IDE ports)
k. Set “Onboard Serial Port 1″ to “Disabled”
l. Set “Onboard Parallel Port” to Disabled”
Power Management Setup:
a. Set “ACPI Suspend Type” to “S3(STR)”
b. Set “Soft-Off by PWR-BTTN” to “Instant-Off”
c. Set “PME Event Wake Up” to “Disabled”
d. Set “Power On by Ring” to “Disabled”
e. Set “Resume by Alarm” to “Disabled”
f. Set “HPET Support” to “Enabled”
g. Set “HPET Mode” to “64-bit mode”
h. Set “Power On By Mouse” to “Disabled”
i. Set “Power On By Keyboard” to “Disabled”
j. Set “AC Back Function” to “Soft-Off”
When you’re done, exit the BIOS and be sure to save your settings!
August 12, 2008
KAI , This Link to Leopard Gigabyte motherboard Howto Install
The EP35 version of the board is very similar to the P35, adding a “Dynamic Energy Saver” feature. However, whereas success with weaksauce12’s guide on the P35 is very consistent, results on the EP35 seem to vary considerably. The BIOSes appear to be quite different, and perhaps there are differences that are more subtle.
August 10, 2008
Explore your world, track your progress, and relive your outdoor journeys with MacGPS Pro™. It’s the perfect navigation software to seamlessly integrate your Mac and GPS receiver, to make every adventure better.
August 10, 2008
AirClick USB 1.1.1
About AirClick USB
A remote for your computer. AirClick uses RF signals that travel through walls for control anywhere in your home or outside. The receiver module attaches to any available USB port and receives signal from up to 60 feet away. AirClick USB’s software is ideal for controlling applications including iTunes, QuickTime, and even Keynote or PowerPoint.
August 9, 2008
I’m succeessful installed and running Kalyway 10.5.2 and update to Kalyway 10.5.3 with this original update from Kalyway’s post on May 29th, 2008. This works on any Kalyway installation of 10.5.1 and 10.5.2 to update to the latest Mac OS X Leopard 10.5.4 with apple support update. so, Now i have Leopard 10.5.4 on HP pavillion DV2000 Notebook orignal model.
my problem ON MY SYSTEM it passway by this post below:-
1.VDO CODE problem (No front Row,DVD player) after update to Kalyway 10.5.3 and 10.5.4 wiht this post can sloved my system i point to Download it NVInstallerV41 ONLY. This also fixes the 70017 error in DVD Player.appIt not work fine with .NVInstallerV5
2.Dual boot (xp and mac) with this post easy way and very perfect post
3.I notthing to play let’s play windows XP again 
